j'ai suivit ce mode d'emploi
http://wiki.chezlefab.net/tuto_nix/comprendre_wifi pour établir la connection en manuel la box rejete ma connection
mon mon_hotspot_wpa.conf
ctrl_interface=/var/run/wpa_supplicant
network={
ssid="Livebox-68ac"
scan_ssid=1
key_mgmt=WPA-PSK
psk=xxxxxxxxxxxxxxxxxxxxxxxxxx
}
Code : Tout sélectionner
kanak@:~$ sudo wpa_supplicant -Dwext -i wlan0 -c /etc/wpa_supplicant/mon_hotspot_wpa.conf -dd
[sudo] password for kanak:
Initializing interface 'wlan0' conf '/etc/wpa_supplicant/mon_hotspot_wpa.conf' driver 'wext' ctrl_interface 'N/A' bridge 'N/A'
Configuration file '/etc/wpa_supplicant/mon_hotspot_wpa.conf' -> '/etc/wpa_supplicant/mon_hotspot_wpa.conf'
Reading configuration file '/etc/wpa_supplicant/mon_hotspot_wpa.conf'
ctrl_interface='/var/run/wpa_supplicant'
Line: 3 - start of a new network block
ssid - hexdump_ascii(len=12):
4c 69 76 65 62 6f 78 2d 36 38 61 63 Livebox-68ac
scan_ssid=1 (0x1)
key_mgmt: 0x2
Line 8: Invalid PSK 'xxxxxxxxxxxxxxxxxxxxxxxxxx'.
Line 8: failed to parse psk 'xxxxxxxxxxxxxxxxxxxxxxxxxx'.
Line 9: WPA-PSK accepted for key management, but no PSK configured.
Line 9: failed to parse network block.
Failed to read or parse configuration '/etc/wpa_supplicant/mon_hotspot_wpa.conf'.
Failed to add interface wlan0
Cancelling scan request
Cancelling authentication timeout
il sagit bien du code wpa
Line 8: Invalid PSK 'xxxxxxxxxxxxxxxxxxxxxxxxxx'.
le mien fait 26 caractères en hexa
dans le tuto il en fait plus
il semblerait qu'il n'acepte pas ma clé wpa.
ou alors je me plante !.
merci d'avance pour vos réponse.