graveur maitre ne reconnait pas ses gravures

[pierleon]

salut,que se soit avec k3b ou brasero ,mon graveur ne reconnait pas les dvd qu'il a gravé donc pas de multisession,
suis sur dual boot xp/linux lucid ,ca le fait depuis karmic et je pensais resoudre avec la mise a niveau,pas ce probleme sur xp

[Lætitia]

bonjour,
apparement, il y a pas mal de problème de reconnaissance de périphérique, aussi bien avec Brasero qu'avec k3b. Ton souci vient peut-être de là.
Que donne:

Code : Tout sélectionner

wodim dev=/dev/scd0 -prca

[mélodie]

Code : Tout sélectionner

wodim dev=/dev/scd0 -prca

Bonjour Laetitia,

Je n'ai pas trouvé -prca dans le man de wodim. Par contre j'ai trouvé -prcap, est-ce ce dont tu voulais parler ?

-prcap Print the drive capabilities for SCSI-3/mmc compliant drives as obtained from
mode page 0x2A. Values marked with kB use 1000 bytes as kilo-byte, values
marked with KB use 1024 bytes as Kilo-byte.

J'ai beau faire "/-prca" dans le man, je ne trouve que celui-ci...

Je ne serai pas plus utile sur ce coup-là, car je n'ai jamais gravé en multi-session... et je grave de moins en moins. (boots usb principalement, et pas d'autres besoins)

[pierleon]

salut et merci de repondre ,le lecteur est reconnu,mais je viens de m'apercevoir que c'est la reconnaissance des disques ,les dvd -R ne sont reconnus que s' ils sont vierges dans le graveur ,le lecteur lui les reconnais quel que soit le nombre de sesssions donc je vais rester sur des dvd +R,et finir les -R dans xp .
Sinon la commade me donne ca ,mais je n'y comprend pas grand chose

pierleon@pierleon-desktop:~$ wodim dev=/dev/scd0 -prca
wodim: Bad Option: -prca.
Usage: wodim [options] track1...trackn

Use wodim -help
to get a list of valid options.

Use wodim blank=help
to get a list of valid blanking options.

Use wodim dev=b,t,l driveropts=help -checkdrive
to get a list of drive specific options.

Use wodim dev=help
to get a list of possible SCSI transport specifiers.
pierleon@pierleon-desktop:~$ wodim -help
Usage: wodim [options] track1...trackn
Options:
-version print version information and exit
dev=target SCSI target to use as CD/DVD-Recorder
gracetime=# set the grace time before starting to write to #.
timeout=# set the default SCSI command timeout to #.
debug=#,-d Set to # or increment misc debug level
kdebug=#,kd=# do Kernel debugging
-verbose,-v increment general verbose level by one
-Verbose,-V increment SCSI command transport verbose level by one
-silent,-s do not print status of failed SCSI commands
driver=name user supplied driver name, use with extreme care
driveropts=opt a comma separated list of driver specific options
-setdropts set driver specific options and exit
-checkdrive check if a driver for the drive is present
-prcap print drive capabilities for MMC compliant drives
-inq do an inquiry for the drive and exit
-scanbus scan the SCSI and IDE buses and exit
-reset reset the SCSI bus with the cdrecorder (if possible)
-abort send an abort sequence to the drive (may help if hung)
-overburn allow to write more than the official size of a medium
-ignsize ignore the known size of a medium (may cause problems)
-useinfo use *.inf files to overwrite audio options.
speed=# set speed of drive
blank=type blank a CD-RW disc (see blank=help)
-format format a CD-RW/DVD-RW/DVD+RW disc
formattype=# select the format method for DVD+RW disc
fs=# Set fifo size to # (0 to disable, default is 4 MB)
ts=# set maximum transfer size for a single SCSI command
-load load the disk and exit (works only with tray loader)
-lock load and lock the disk and exit (works only with tray loader)
-eject eject the disk after doing the work
-dummy do everything with laser turned off
-msinfo retrieve multi-session info for genisoimage
-msifile=path run -msinfo and copy output to file
-toc retrieve and print TOC/PMA data
-atip retrieve and print ATIP data
-multi generate a TOC that allows multi session
In this case default track type is CD-ROM XA mode 2 form 1 - 2048 bytes
-fix fixate a corrupt or unfixated disk (generate a TOC)
-nofix do not fixate disk after writing tracks
-waiti wait until input is available before opening SCSI
-immed Try to use the SCSI IMMED flag with certain long lasting commands
-force force to continue on some errors to allow blanking bad disks
-tao Write disk in TAO mode.
-dao Write disk in SAO mode.
-sao Write disk in SAO mode.
-raw Write disk in RAW mode.
-raw96r Write disk in RAW/RAW96R mode.
-raw96p Write disk in RAW/RAW96P mode.
-raw16 Write disk in RAW/RAW16 mode.
-clone Write disk in clone write mode.
tsize=# Length of valid data in next track
padsize=# Amount of padding for next track
pregap=# Amount of pre-gap sectors before next track
defpregap=# Amount of pre-gap sectors for all but track #1
mcn=text Set the media catalog number for this CD to 'text'
isrc=text Set the ISRC number for the next track to 'text'
index=list Set the index list for the next track to 'list'
-text Write CD-Text from information from *.inf or *.cue files
textfile=name Set the file with CD-Text data to 'name'
cuefile=name Set the file with CDRWIN CUE data to 'name'
-audio Subsequent tracks are CD-DA audio tracks
-data Subsequent tracks are CD-ROM data mode 1 - 2048 bytes (default)
-mode2 Subsequent tracks are CD-ROM data mode 2 - 2336 bytes
-xa Subsequent tracks are CD-ROM XA mode 2 form 1 - 2048 bytes
-xa1 Subsequent tracks are CD-ROM XA mode 2 form 1 - 2056 bytes
-xa2 Subsequent tracks are CD-ROM XA mode 2 form 2 - 2324 bytes
-xamix Subsequent tracks are CD-ROM XA mode 2 form 1/2 - 2332 bytes
-cdi Subsequent tracks are CDI tracks
-isosize Use iso9660 file system size for next data track
-preemp Audio tracks are mastered with 50/15 microseconds preemphasis
-nopreemp Audio tracks are mastered with no preemphasis (default)
-copy Audio tracks have unlimited copy permission
-nocopy Audio tracks may only be copied once for personal use (default)
-scms Audio tracks will not have any copy permission at all
-pad Pad data tracks with 15 zeroed sectors
Pad audio tracks to a multiple of 2352 bytes
-nopad Do not pad data tracks (default)
-shorttrack Subsequent tracks may be non Red Book < 4 seconds if in SAO or RAW mode
-noshorttrack Subsequent tracks must be >= 4 seconds
-swab Audio data source is byte-swapped (little-endian/Intel)
The type of the first track is used for the toc type.
Currently only form 1 tracks are supported.
pierleon@pierleon-desktop:~$ wodim blank=help
Blanking options:
all blank the entire disk
disc blank the entire disk
disk blank the entire disk
fast minimally blank the entire disk (PMA, TOC, pregap)
minimal minimally blank the entire disk (PMA, TOC, pregap)
track blank a track
unreserve unreserve a track
trtail blank a track tail
unclose unclose last session
session blank last session
pierleon@pierleon-desktop:~$ wodim dev=b,t,l driveropts=help -checkdrive
wodim: Invalid argument.
Cannot open SCSI driver!
For possible targets try 'wodim --devices' or 'wodim -scanbus'.
For possible transport specifiers try 'wodim dev=help'.
For IDE/ATAPI devices configuration, see the file README.ATAPI.setup from
the wodim documentation.
pierleon@pierleon-desktop:~$ wodim dev=help
Supported SCSI transports for this platform:

Transport name: sg
Transport descr.: Generic transport independent SCSI
Transp. layer ind.:
Target specifier: bus,target,lun
Target example: 1,2,0
SCSI Bus scanning: supported
Open via UNIX device: not supported

Transport name: ATA
Transport descr.: ATA Packet specific SCSI transport
Transp. layer ind.: ATAPI:
Target specifier: bus,target,lun
Target example: ATAPI:1,2,0
SCSI Bus scanning: supported
Open via UNIX device: not supported

Transport name: ATA
Transport descr.: ATA Packet specific SCSI transport using sg interface
Transp. layer ind.: ATA:
Target specifier: bus,target,lun
Target example: 1,2,0
SCSI Bus scanning: supported
Open via UNIX device: not supported

Transport name: RSCSI
Transport descr.: Remote SCSI
Transp. layer ind.: REMOTE:
Target specifier: rscsi@host:bus,target,lun
Target example: REMOTE:rscsi@host:1,2,0
SCSI Bus scanning: supported
Open via UNIX device: not supported
pierleon@pierleon-desktop:~$

[Lætitia]

bonjour,

Par contre j'ai trouvé -prcap, est-ce ce dont tu voulais parler ?

Erf, j'ai effectivement mangé la fin. Désolée

Code : Tout sélectionner

wodim dev=/dev/scd0 -prcap

Pour la gravure «invisible», je me souviens vaguement avoir rencontré ce problème sur Jaunty. Par contre, le premier projet gravé était bien lu sur une autre distrib'. Je me souviens d'un message parlant de fichiers invisibles mais présents sur le cd (c'pas très clair). Ça te dit quelque chose ? Je vais essayer de me souvenir (c'est pas gagné).

Pour le multi session, si tu n'as pas «fermé» ton cd à la fin de la première gravure, ça se fait bien sur Brasero. Ceci dit, j'ai viré les greffons; Edition>greffons et tu décoches tout.
Tu ajoutes les fichiers au projet que tu veux graver. Tu mets ton cd; Edition>Importer. Les fichiers présents sur le cd s'ajoutent à ta liste. Puis, tu vas sur graver et tu choisis de «laisser le disque ouvert».
Si tu ne le laisses pas ouvert, c'est cuit pour le multi session.

Bon courage,

[pierleon]

Salut ,j'ai essayé brasero c'est pareil dès que la gravure est finie, le disque ejecté,je le remet et le graveur disparait du poste de travail .Si je met le disque dans le lecteur esclave ,il est reconnu et lisible.Si je met un disque gravé,commercial ou (grave en multisession sur windows) il est reconnu et lisible dans le graveur,je ne comprend pas ce qui fait que les disques gravés sur ubuntu ne sont pas reconnu sur ubuntu par le graveur de ces meme disques .Ca marchait sur heron hardy et depuis les mises a niveau c'est fini ,je vais attendre la sortie officielle de lucid pour faire une installation propre
en clair je laisse tomber.Merci

[pierleon]

ps; avec prcap j'ai ca je vois le ecteur atapi mais pas de graveur ,pourtant il est pris en charge si il est vide ou avec un cd/dvd grave ailleur quie sur lui

[pierleon]

pierleon@pierleon-desktop:~$ wodim dev=/dev/scd0 -prcap
wodim: Operation not permitted. Warning: Cannot raise RLIMIT_MEMLOCK limits.
Error trying to open /dev/scd0 exclusively (Device or resource busy)... retrying in 1 second.
Error trying to open /dev/scd0 exclusively (Device or resource busy)... retrying in 1 second.
Error trying to open /dev/scd0 exclusively (Device or resource busy)... retrying in 1 second.
Error trying to open /dev/scd0 exclusively (Device or resource busy)... retrying in 1 second.
Error trying to open /dev/scd0 exclusively (Device or resource busy)... giving up.
wodim: Device or resource busy.
Cannot open SCSI driver!
For possible targets try 'wodim --devices' or 'wodim -scanbus'.
For possible transport specifiers try 'wodim dev=help'.
For IDE/ATAPI devices configuration, see the file README.ATAPI.setup from
the wodim documentation.
pierleon@pierleon-desktop:~$ wodim -scanbus
mwodim: No such file or directory.
Cannot open SCSI driver!
For possible targets try 'wodim --devices' or 'wodim -scanbus'.
For possible transport specifiers try 'wodim dev=help'.
For IDE/ATAPI devices configuration, see the file README.ATAPI.setup from
the wodim documentation.
pierleon@pierleon-desktop:~$ wodim --devices
wodim: No such file or directory.
Cannot open SCSI driver!
For possible targets try 'wodim --devices' or 'wodim -scanbus'.
For possible transport specifiers try 'wodim dev=help'.
For IDE/ATAPI devices configuration, see the file README.ATAPI.setup from
the wodim documentation.
pierleon@pierleon-desktop:~$ wodim dev=help
Supported SCSI transports for this platform:

Transport name: sg
Transport descr.: Generic transport independent SCSI
Transp. layer ind.:
Target specifier: bus,target,lun
Target example: 1,2,0
SCSI Bus scanning: supported
Open via UNIX device: not supported

Transport name: ATA
Transport descr.: ATA Packet specific SCSI transport
Transp. layer ind.: ATAPI:
Target specifier: bus,target,lun
Target example: ATAPI:1,2,0
SCSI Bus scanning: supported
Open via UNIX device: not supported

Transport name: ATA
Transport descr.: ATA Packet specific SCSI transport using sg interface
Transp. layer ind.: ATA:
Target specifier: bus,target,lun
Target example: 1,2,0
SCSI Bus scanning: supported
Open via UNIX device: not supported

Transport name: RSCSI
Transport descr.: Remote SCSI
Transp. layer ind.: REMOTE:
Target specifier: rscsi@host:bus,target,lun
Target example: REMOTE:rscsi@host:1,2,0
SCSI Bus scanning: supported
Open via UNIX device: not supported
pierleon@pierleon-desktop:~$

[captnfab]

Yo,
essaye de lancer les commandes précédentes en root.

[Lætitia]

bonjour,
Des fois que …

Code : Tout sélectionner

wodim dev=/dev/scd0 -prcap

Code : Tout sélectionner

wodim -scanbus

Code : Tout sélectionner

wodim --devices

Et que donne

Code : Tout sélectionner

apt-cache policy wodim

@+

[pierleon]

salut cap'tain fab ,et oui c'est pas pareil avec sudo,mais je n'y comprend toujours rien a part qu'il ne dit rien des dvd et cd +R

pierleon@pierleon-desktop:~$ sudo wodim dev=/dev/scd0 -prcap
[sudo] password for pierleon:
Device type : Removable CD-ROM
Version : 5
Response Format: 2
Capabilities :
Vendor_info : '_NEC '
Identification : 'DVD_RW ND-4570A '
Revision : '1.03'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.

Drive capabilities, per MMC-3 page 2A:

Does read CD-R media
Does write CD-R media
Does read CD-RW media
Does write CD-RW media
Does read DVD-ROM media
Does read DVD-R media
Does write DVD-R media
Does read DVD-RAM media
Does write DVD-RAM media
Does support test writing

Does read Mode 2 Form 1 blocks
Does read Mode 2 Form 2 blocks
Does read digital audio blocks
Does restart non-streamed digital audio reads accurately
Does support Buffer-Underrun-Free recording
Does read multi-session CDs
Does read fixed-packet CD media using Method 2
Does not read CD bar code
Does read R-W subcode information
Does not return R-W subcode de-interleaved and error-corrected
Does read raw P-W subcode data from lead in
Does return CD media catalog number
Does return CD ISRC information
Does support C2 error pointers
Does not deliver composite A/V data

Does play audio CDs
Number of volume control levels: 256
Does support individual volume control setting for each channel
Does support independent mute setting for each channel
Does not support digital output on port 1
Does not support digital output on port 2

Loading mechanism type: tray
Does support ejection of CD via START/STOP command
Does not lock media on power up via prevent jumper
Does allow media to be locked in the drive via PREVENT/ALLOW command
Is not currently in a media-locked state
Does not support changing side of disk
Does not have load-empty-slot-in-changer feature
Does not support Individual Disk Present feature

Maximum read speed: 8467 kB/s (CD 48x, DVD 6x)
Current read speed: 8467 kB/s (CD 48x, DVD 6x)
Maximum write speed: 8467 kB/s (CD 48x, DVD 6x)
Current write speed: 8467 kB/s (CD 48x, DVD 6x)
Rotational control selected: CLV/PCAV
Buffer size in KB: 2048
Copy management revision supported: 1
Number of supported write speeds: 6
Write speed # 0: 8467 kB/s CLV/PCAV (CD 48x, DVD 6x)
Write speed # 1: 7056 kB/s CLV/PCAV (CD 40x, DVD 5x)
Write speed # 2: 5645 kB/s CLV/PCAV (CD 32x, DVD 4x)
Write speed # 3: 4234 kB/s CLV/PCAV (CD 24x, DVD 3x)
Write speed # 4: 2822 kB/s CLV/PCAV (CD 16x, DVD 2x)
Write speed # 5: 1411 kB/s CLV/PCAV (CD 8x, DVD 1x)

Supported CD-RW media types according to MMC-4 feature 0x37:
Does write multi speed CD-RW media
Does write high speed CD-RW media
Does write ultra high speed CD-RW media
Does write ultra high speed+ CD-RW media
pierleon@pierleon-desktop:~$ sudo wodim -scanbus
scsibus1:
1,0,0 100) '_NEC ' 'DVD_RW ND-4570A ' '1.03' Removable CD-ROM
1,1,0 101) 'ATAPI ' 'DVD-ROM 16XMax ' '1.30' Removable CD-ROM
1,2,0 102) *
1,3,0 103) *
1,4,0 104) *
1,5,0 105) *
1,6,0 106) *
1,7,0 107) *
pierleon@pierleon-desktop:~$ sudo wodim --devices
wodim: Overview of accessible drives (2 found) :
-------------------------------------------------------------------------
0 dev='/dev/scd0' rwrw-- : '_NEC' 'DVD_RW ND-4570A'
1 dev='/dev/scd1' rwrw-- : 'ATAPI' 'DVD-ROM 16XMax'
-------------------------------------------------------------------------
pierleon@pierleon-desktop:~$ sudo apt-cache policy wodim
wodim:
Installé : 9:1.1.10-1ubuntu1
Candidat : 9:1.1.10-1ubuntu1
Table de version :
*** 9:1.1.10-1ubuntu1 0
500 http://fr.archive.ubuntu.com/ubuntu/ lucid/main Packages
100 /var/lib/dpkg/status
pierleon@pierleon-desktop:~$
Merci

[captnfab]

Certains lisent dans les entrailles, d'autres dans les sorties de « wodim ». Pour ma part, ni l'un ni l'autre ne m'inspirent…
Désolé

[pierleon]

Merci d'avoir repondu ,c'est deja sympa de ta part ,sinon j'ai fais le tour des forums ,sans reponse et je ne comprend pas d'ou viens ce probleme ,je vais surement desinstaller et remettre la version lucid ,si j'y arrive sans me planter ...dans le pire des cas j'ai le dual boot xp /heron sur le second DD. Encore merci et a une prochaine peut etre...

[Lætitia]

bonjour,
Wodim n'indique pas de souci, tu aurais des «not read» et des «not write»

je ne comprend pas d'ou viens ce probleme

Pas mieux , vraiment désolée.

[mélodie]

Selon le man de wodim:

-multi Allow multi session CDs to be made. This flag needs to be present on all ses‐
sions of a multi session disk, except you want to create a session that will
be the last session on the media. The fixation will be done in a way that
allows the CD/DVD-Recorder to append additional sessions later. This is done
by generation a TOC with a link to the next program area. The so generated
media is not 100% compatible to manufactured CDs (except for CDplus). Use
only for recording of multi session CDs. If this option is present, the
default track type is CD-ROM XA mode 2 form 1 and the sector size is 2048
bytes. The XA sector subheaders will be created by the drive. The Sony
drives have no hardware support for CD-ROM XA mode 2 form 1. You have to
specify the -data option in order to create multi session disks on these
drives. As long as wodim does not have a coder for converting data sectors to
audio sectors, you need to force CD-ROM sectors by including the -data option
if you like to record a multisession disk in SAO mode. Not all drives allow
multisession CDs in SAO mode.

/la flemme de traduire... et puis je ne grave presque plus, et des dvd encore moins... sauf qu'on m'en a donné et que je ne sais pas quoi en faire.