BSOD : Bloqué sur le logo Windows [résolu]

Tous les problèmes de Windows : message d'erreur, BSOD et écran bleu, erreur Windows Update ou d'installation, etc

Modérateur : Mods Windows

Manette234

BSOD : Bloqué sur le logo Windows [résolu]

par Manette234 »

Bonjour,

Problème complexe pour moi depuis ce matin. Au travail, l'ordinateur destiné à l'enregistrement des vidéo surveillance a rencontré un problème.
C'est un vieux coucou : un Dell Optiplex 755, Radeon HD 2400 XT, Windows 7 (64bits).
Il est relié en grâce à un adaptateur usb/hdmi à un téléviseur Samsung, raison pour laquelle je n'ai pas compris de suite l'origine du problème puisqu'en usb l'affichage n'apparaît que durant l'étape du choix des utilisateurs. J'ai intervertis les 2 écrans pour le brancher à l'aide d'un adaptateur VGA/DVI (enfin DVI semble-t-il ? Puisque d'une race qui m'était inconnue jusqu'alors)
prise-hdmi.jpg
Bon gré mal gré, je lance donc Windows pour me rendre compte qu'il reste figé sur le logo windows environ 10 minutes, avant de planter et de me donner un blue screen (BSOD) furtif, avec les informations suivantes (recueillies avec WhoCrashed en mode sans échec de Windows) :

Code : Tout sélectionner

[i]--------------------------------------------------------------------------------
Welcome to WhoCrashed (HOME EDITION) v 6.65
--------------------------------------------------------------------------------

This program checks for drivers which have been crashing your computer. If your computer has displayed a blue (or black) screen of death, suddenly rebooted or shut down then this program might help you find the root cause of the problem and a solution. 

Whenever a computer suddenly reboots without displaying any notice or blue (or black) screen of death, the first thing that is often thought about is a hardware failure. In reality, on Windows a lot of system crashes are caused by malfunctioning device drivers and kernel modules. In case of a kernel error, many computers do not show a blue or black screen unless they are configured for this. Instead these systems suddenly reboot without any notice. 

This program will analyze your crash dumps with the single click of a button. It will tell you what drivers are likely to be responsible for crashing your computer. It will report a conclusion which offers suggestions on how to proceed in any situation while the analysis report will display internet links which will help you further troubleshoot any detected problems. 

To obtain technical support visit www.resplendence.com/support

Click here to check if you have the latest version or if an update is available. 

Just click the Analyze button for a comprehensible report ...



--------------------------------------------------------------------------------
Home Edition Notice
--------------------------------------------------------------------------------

This version of WhoCrashed is free for use at home only. If you would like to use this software at work or in a commercial environment you should get the professional edition of WhoCrashed which allows you to perform more thorough and detailed analysis. It also offers a range of additional features such as remote analysis on remote directories and remote computers on the network. 

PLEASE NOTE THAT THIS VERSION OF WHOCRASHED IS NOT LICENSED FOR USE BY PROFESSIONAL SUPPORT ENGINEERS.

Click here for more information on the professional edition.
Click here to buy the the professional edition of WhoCrashed.


--------------------------------------------------------------------------------
System Information (local)
--------------------------------------------------------------------------------

Computer name: *******-PC
Windows version: Windows 7 Service Pack 1 , 6.1, build: 7601
Windows dir: C:\Windows
Hardware: OptiPlex 755 , Dell Inc., 0PU052
CPU: GenuineIntel Intel(R) Core(TM)2 Duo CPU E6550 @ 2.33GHz Intel8664, level: 6
2 logical processors, active mask: 3
RAM: 4158246912 bytes (3,9GB)




--------------------------------------------------------------------------------
Crash Dump Analysis
--------------------------------------------------------------------------------

Crash dumps are enabled on your computer. This system is not configured for complete or automatic crash dumps. For best results, configure your system to write out complete or automatic crash dumps. Select Tools->Crash Dump Configuration from the main menu to configure your system to write out complete memory dumps. 

Crash dump directories: 
C:\Windows
C:\Windows\Minidump

On Mon 14/10/2019 13:19:10 your computer crashed or a problem was reported
crash dump file: C:\Windows\Minidump\101419-24351-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x93CA0) 
Bugcheck code: 0x9F (0x3, 0xFFFFFA80047C1A10, 0xFFFFF80004016568, 0xFFFFF9800382EE50)
Error: DRIVER_POWER_STATE_FAILURE
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: This bug check indicates that the driver is in an inconsistent or invalid power state. A device object has been blocking an IRP for too long a time. 
This is likely to be caused by a hardware problem. 
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time. 



On Mon 14/10/2019 13:19:10 your computer crashed or a problem was reported
crash dump file: C:\Windows\MEMORY.DMP
This was probably caused by the following module: ntkrnlmp.exe (nt+0x93CA0) 
Bugcheck code: 0x9F (0x3, 0xFFFFFA80047C1A10, 0xFFFFF80004016568, 0xFFFFF9800382EE50)
Error: DRIVER_POWER_STATE_FAILURE
Bug check description: This bug check indicates that the driver is in an inconsistent or invalid power state. A device object has been blocking an IRP for too long a time. 
This is likely to be caused by a hardware problem. 
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time. 





--------------------------------------------------------------------------------
Conclusion
--------------------------------------------------------------------------------

2 crash dumps have been found and analyzed. No offending third party drivers have been found. Connsider using WhoCrashed Professional which offers more detailed analysis using symbol resolution. Also configuring your system to produce a full memory dump may help you. 


Read the topic general suggestions for troubleshooting system crashes for more information. 

Note that it's not always possible to state with certainty whether a reported driver is responsible for crashing your system or that the root cause is in another module. Nonetheless it's suggested you look for updates for the products that these drivers belong to and regularly visit Windows update or enable automatic updates for Windows. In case a piece of malfunctioning hardware is causing trouble, a search with Google on the bug check errors together with the model name and brand of your computer may help you investigate this further. [/i]
Bref, depuis ce matin je tente la restauration (visiblement il y a eu une mise à jour samedi) mais par 2 fois ça n'a rien donné. J'ai tenté la désinstallation de la mise à jour, Echec.
Et la mise à jour de la carte graphique sans succès non plus. CHKDSK /f /r, le disque est propre. J'ai retiré tous les périphériques externes mais là je sèche.

Y aurait-il une bonne âme pour m'aider à y voir plus clair ?

Merci d'avance
Vous ne pouvez pas consulter les pièces jointes insérées à ce message.
Malekal_morte
Messages : 114084
Inscription : 10 sept. 2005 13:57

Re: BSOD Bloqué sur le logo Windows

par Malekal_morte »

Salut,

Je pense qu'il faudrait tester avec une autre carte graphique pour commencer.

Pour ceux qui tombent sur le sujet :
Après tu dois pouvoir accéder aux options de dépannage, voir :
Les options de récupération de dépannage Windows 7
Ca permet d'aller en mode sans échec de Windows.

De là, tu peux désinstaller les pilotes ATI et voir si ça boot ensuite.
Voir aussi si une mise à jour de Windows s'est installée avant.
Première règle élémentaire de sécurité : on réfléchit puis on clic et pas l'inverse - Les fichiers/programmes c'est comme les bonbons, quand ça vient d'un inconnu, on n'accepte pas !
Comment protéger son PC des virus
Windows 11 : Compatibilité, Configuration minimale requise, télécharger ISO et installer Windows 11

Comment demander de l'aide sur le forum
Partagez malekal.com : n'hésitez pas à partager les articles qui vous plaisent sur la page Facebook du site.
Manette234

Re: BSOD : Bloqué sur le logo Windows

par Manette234 »

Merci pour ton aide !! C'était le pilote de la CG en effet ! Tout fonctionne !
Bonne journée !
Malekal_morte
Messages : 114084
Inscription : 10 sept. 2005 13:57

Re: BSOD : Bloqué sur le logo Windows

par Malekal_morte »

Parfait =)

Bonne fin de journée !
Première règle élémentaire de sécurité : on réfléchit puis on clic et pas l'inverse - Les fichiers/programmes c'est comme les bonbons, quand ça vient d'un inconnu, on n'accepte pas !
Comment protéger son PC des virus
Windows 11 : Compatibilité, Configuration minimale requise, télécharger ISO et installer Windows 11

Comment demander de l'aide sur le forum
Partagez malekal.com : n'hésitez pas à partager les articles qui vous plaisent sur la page Facebook du site.
  • Sujets similaires
    Réponses
    Vues
    Dernier message

Revenir à « Windows : Résoudre les problèmes »