samba et Smb4k

Des questions pour configurer votre réseau, Wifi, installer un serveur, sécuriser votre machine ?

Modérateur : Mods GNU/Linux

Avatar de l’utilisateur
gerome
Intermédiaire
Intermédiaire
Messages : 204
Inscription : 10 avr. 2009 09:26
Localisation : planète mars

samba et Smb4k

Message par gerome » 09 févr. 2011 07:18

Salut je viens de trouver en partie la solution à mon problème de réseau : elle s'appelle smb4k que j'ai installé sur Kubuntu : génial je vois tous les ordis de mon workgroup en 2 coups de cuillère à pot PDT_001 PDT_001 PDT_001
Le montage des partages se fait aussi les doigts dans le nez les orteils en éventail donc génial mais merci pour les explications sur le montage des partages sans elles je me serais trouvé fort dépourvu quand samba fut venu...amis de la poésie PDT_004

J'ai juste un dernier petit problème à soumettre : alors que mon PC kubuntu est considéré comme serveur maitre -je pense que la tout va bien-, quand je clique sur mon PC Vista (adresse IP ok), il me dit "système d'exploitation inconnu" et "serveur inconnu"

Serait_ce une histoire de "wins support" dans smb.conf ou autre chose qui n'a aucun rapport ?

Merci d'avance PDT_016




Avatar de l’utilisateur
captnfab
Geek à longue barbe
Geek à longue barbe
Messages : 2292
Inscription : 31 mai 2008 22:03
Localisation : Aubenas (07), Montpellier (34)
Contact :

Re: samba et Smb4k

Message par captnfab » 12 févr. 2011 16:21

Mhh, ça, je ne maîtrise pas.
Ça t'empêche d'accéder aux partages ou non ?
Capitaine Fab (captnfab), Girafe à longues dents.
Liens utiles et nécessaires : Avant de poster, consultez les règles du forum || Débutants : la FAQ Linux
Entraide Debian : Documentation Debian-Facile || Forum DF || [url=irc://irc.freenode.net/debian-facile]Salon IRC : #debian-facile @ irc.freenode.net[/url]

Avatar de l’utilisateur
juddix
newbie
newbie
Messages : 33
Inscription : 12 mars 2010 19:13
Localisation : 93

Re: samba et Smb4k

Message par juddix » 14 févr. 2011 20:41

montre nous ton /etc/samba/smb.conf

bien souvent j'ai vu des config samba beaucoup trop complex.
dans un reseau privé a domicile ça sert a rien de mettre trop de regles surtout quand les ports sont fermé, puis après il existe aussi un filtre pour permettre seulement quelques IP mais je l'ai pas mit pour rendre cette config opérationnel.
voila mon smb.conf pour te faire une idée sur une debian lenny

Code : Tout sélectionner

[global]
	netbios name = G406
	server string = Samba 3
        security = user
  

[soft]
	path = /home/tony/samba/partage
	browseable = Yes
        read only = No

[win7]
        path = /home/tony/samba/win7_32
        browseable = Yes
        read only = Yes
après il faut donner l'acces a un utilisateur crée genre ton user.
smbpasswd -a ton_user

efface tous les log dans /var/log/samba/
puis regarde ce qui ce met dans les log

il y aucuns wins a configurer, en tout cas je le fait pas sur les clients que je peux utiliser en XP, win 7, et Mac OS.
Vista, on ne l'utilise pas désolé mais ils ont pas du changer grand chose sur le samba chez windows.

voila en gros, il faut pas cherche des config trop compliqué....

Avatar de l’utilisateur
gerome
Intermédiaire
Intermédiaire
Messages : 204
Inscription : 10 avr. 2009 09:26
Localisation : planète mars

Re: samba et Smb4k

Message par gerome » 18 févr. 2011 22:04

Merci pour le conseil avisé finalement ça marche avec seulement 1 paramètre modifié : wins support=yes car il permet au démon nmbd d'agir sur la résolution des noms PDT_008 .

J'ai du modifier quelsques paramètres de la base de registre de Vista, il faut que je retrouve lesquels.

Je le dis aussi pour ceux qui galèrent sous Nautilus : choisissez smb4k avec le paquet super installé, cela vous évitera plein de galères réseau PDT_018

Cela dit il faut que je signale un bug de smb4k vis-à vis du fichiers /etc/sudoers

Avatar de l’utilisateur
juddix
newbie
newbie
Messages : 33
Inscription : 12 mars 2010 19:13
Localisation : 93

Re: samba et Smb4k

Message par juddix » 20 févr. 2011 10:55

je sais pas si tu sais mais smb4k c'est un samba pour kde, un truc que tu dois surement configurer dans les parametre reseau de kde.

le package samba, suffit pour partager des fichiers, nul besoin de kde pour faire ça... la preuve te voila obligé de faire des manip dans sudoers et ton smb.conf

tient, tu nous montre ton /etc/smb.conf pour voir ?

et au final, devoir bidouiller les clients windows pour accepter le wins... pppfff tu t'es bien cassé la tete la encore, je joint le samba depuis des clients xp, et win 7, et mac os 10.6 sans devoir modifier le system.

le samba est un partage de fichiers prévu et concu pour partager des fichiers entre Linux et Windows.


Avatar de l’utilisateur
gerome
Intermédiaire
Intermédiaire
Messages : 204
Inscription : 10 avr. 2009 09:26
Localisation : planète mars

Re: samba et Smb4k

Message par gerome » 20 févr. 2011 14:05

là je ne peux qu' acquiescer il est vrai que j'ai trop cherché la complexité PDT_006 ; c'est comme quand on fait des maths, plus on se triture le cerveau moins on trouve de solution PDT_004

Je n'ai rien eu à manipuler concernant les paramètres réseau sous kde pas de problèmes à ce niveau PDT_008

je transmettrai mon smb.conf ultérieurement @ + PDT_016

Avatar de l’utilisateur
gerome
Intermédiaire
Intermédiaire
Messages : 204
Inscription : 10 avr. 2009 09:26
Localisation : planète mars

Re: samba et Smb4k

Message par gerome » 20 févr. 2011 14:08

ah oui j'ai volontairement laissé security=share car je n'ai que 2 PC à la maison et sur aucun des 2 je n'ai de données sensibles comme le code pin du coffre de la réserve fédérale américaine PDT_005 .

Avatar de l’utilisateur
gerome
Intermédiaire
Intermédiaire
Messages : 204
Inscription : 10 avr. 2009 09:26
Localisation : planète mars

Re: samba et Smb4k

Message par gerome » 21 févr. 2011 19:35

Salut voici mon smb.conf, avec un seul paramètre modifé : wins support=yes; j'avais expliqué avant pourquoi j'avais laissé "security=share"

#======================= Global Settings =======================

[global]

## Browsing/Identification ###

# Change this to the workgroup/NT-domain name your Samba server will part of
workgroup = REZOWIN

# server string is the equivalent of the NT Description field
server string = PC2GEGEKKO

# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable its WINS Server
# wins support = yes

# WINS Server - Tells the NMBD components of Samba to be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
; wins server = w.x.y.z

# This will prevent nmbd to search for NetBIOS names through DNS.
dns proxy = no

# What naming service and in what order should we use to resolve host names
# to IP addresses
; name resolve order = lmhosts host wins bcast

#### Networking ####

# The specific set of interfaces / networks to bind to
# This can be either the interface name or an IP address/netmask;
# interface names are normally preferred
; interfaces = 127.0.0.0/8 eth0

# Only bind to the named interfaces and/or networks; you must use the
# 'interfaces' option above to use this.
# It is recommended that you enable this feature if your Samba machine is
# not protected by a firewall or is a firewall itself. However, this
# option cannot handle dynamic or non-broadcast interfaces correctly.
; bind interfaces only = yes



#### Debugging/Accounting ####

# This tells Samba to use a separate log file for each machine
# that connects
log file = /var/log/samba/log.%m

# Cap the size of the individual log files (in KiB).
max log size = 1000

# If you want Samba to only log through syslog then set the following
# parameter to 'yes'.
# syslog only = no

# We want Samba to log a minimum amount of information to syslog. Everything
# should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log
# through syslog you should set the following parameter to something higher.
syslog = 0

# Do something sensible when Samba crashes: mail the admin a backtrace
panic action = /usr/share/samba/panic-action %d


####### Authentication #######

# "security = user" is always a good idea. This will require a Unix account
# in this server for every user accessing the server. See
# /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/ServerType.html
# in the samba-doc package for details.
# security = user

# You may wish to use password encryption. See the section on
# 'encrypt passwords' in the smb.conf(5) manpage before enabling.
encrypt passwords = true

# If you are using encrypted passwords, Samba will need to know what
# password database type you are using.
passdb backend = tdbsam

obey pam restrictions = yes

# This boolean parameter controls whether Samba attempts to sync the Unix
# password with the SMB password when the encrypted SMB password in the
# passdb is changed.
unix password sync = yes

# For Unix password sync to work on a Debian GNU/Linux system, the following
# parameters must be set (thanks to Ian Kahan <<kahan@informatik.tu-muenchen.de> for
# sending the correct chat script for the passwd program in Debian Sarge).
passwd program = /usr/bin/passwd %u
passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .

# This boolean controls whether PAM will be used for password changes
# when requested by an SMB client instead of the program listed in
# 'passwd program'. The default is 'no'.
pam password change = yes

# This option controls how unsuccessful authentication attempts are mapped
# to anonymous connections
map to guest = bad user

########## Domains ###########

# Is this machine able to authenticate users. Both PDC and BDC
# must have this setting enabled. If you are the BDC you must
# change the 'domain master' setting to no
#
; domain logons = yes
#
# The following setting only takes effect if 'domain logons' is set
# It specifies the location of the user's profile directory
# from the client point of view)
# The following required a [profiles] share to be setup on the
# samba server (see below)
; logon path = \\%N\profiles\%U
# Another common choice is storing the profile in the user's home directory
# (this is Samba's default)
# logon path = \\%N\%U\profile

# The following setting only takes effect if 'domain logons' is set
# It specifies the location of a user's home directory (from the client
# point of view)
; logon drive = H:
# logon home = \\%N\%U

# The following setting only takes effect if 'domain logons' is set
# It specifies the script to run during logon. The script must be stored
# in the [netlogon] share
# NOTE: Must be store in 'DOS' file format convention
; logon script = logon.cmd

# This allows Unix users to be created on the domain controller via the SAMR
# RPC pipe. The example command creates a user account with a disabled Unix
# password; please adapt to your needs
; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u

# This allows machine accounts to be created on the domain controller via the
# SAMR RPC pipe.
# The following assumes a "machines" group exists on the system
; add machine script = /usr/sbin/useradd -g machines -c "%u machine account" -d /var/lib/samba -s /bin/false %u

# This allows Unix groups to be created on the domain controller via the SAMR
# RPC pipe.
; add group script = /usr/sbin/addgroup --force-badname %g

########## Printing ##########

# If you want to automatically load your printer list rather
# than setting them up individually then you'll need this
# load printers = yes

# lpr(ng) printing. You may wish to override the location of the
# printcap file
; printing = bsd
; printcap name = /etc/printcap

# CUPS printing. See also the cupsaddsmb(8) manpage in the
# cupsys-client package.
; printing = cups
; printcap name = cups

############ Misc ############

# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
; include = /home/samba/etc/smb.conf.%m

# Most people will find that this option gives better performance.
# See smb.conf(5) and /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/speed.html
# for details
# You may want to add the following on a Linux system:
# SO_RCVBUF=8192 SO_SNDBUF=8192
# socket options = TCP_NODELAY

# The following parameter is useful only if you have the linpopup package
# installed. The samba maintainer and the linpopup maintainer are
# working to ease installation and configuration of linpopup and samba.
; message command = /bin/sh -c '/usr/bin/linpopup "%f" "%m" %s; rm %s' &

# Domain Master specifies Samba to be the Domain Master Browser. If this
# machine will be configured as a BDC (a secondary logon server), you
# must set this to 'no'; otherwise, the default behavior is recommended.
# domain master = auto

# Some defaults for winbind (make sure you're not using the ranges
# for something else.)
; idmap uid = 10000-20000
; idmap gid = 10000-20000
; template shell = /bin/bash

# The following was the default behaviour in sarge,
# but samba upstream reverted the default because it might induce
# performance issues in large organizations.
# See Debian bug #368251 for some of the consequences of *not*
# having this setting and smb.conf(5) for details.
; winbind enum groups = yes
; winbind enum users = yes

# Setup usershare options to enable non-root users to share folders
# with the net usershare command.

# Maximum number of usershare. 0 (default) means that usershare is disabled.
; usershare max shares = 100

# Allow users who've been granted usershare privileges to create
# public shares, not just authenticated ones
usershare allow guests = yes

#======================= Share Definitions =======================

# Un-comment the following (and tweak the other settings below to suit)
# to enable the default home directory shares. This will share each
# user's home director as \\server\username
;[homes]
; comment = Home Directories
; browseable = no

# By default, the home directories are exported read-only. Change the
# next parameter to 'no' if you want to be able to write to them.
; read only = yes

# File creation mask is set to 0700 for security reasons. If you want to
# create files with group=rw permissions, set next parameter to 0775.
; create mask = 0700

# Directory creation mask is set to 0700 for security reasons. If you want to
# create dirs. with group=rw permissions, set next parameter to 0775.
; directory mask = 0700

# By default, \\server\username shares can be connected to by anyone
# with access to the samba server. Un-comment the following parameter
# to make sure that only "username" can connect to \\server\username
# The following parameter makes sure that only "username" can connect
#
# This might need tweaking when using external authentication schemes
; valid users = %S

# Un-comment the following and create the netlogon directory for Domain Logons
# (you need to configure Samba to act as a domain controller too.)
;[netlogon]
; comment = Network Logon Service
; path = /home/samba/netlogon
; guest ok = yes
; read only = yes
; share modes = no

# Un-comment the following and create the profiles directory to store
# users profiles (see the "logon path" option above)
# (you need to configure Samba to act as a domain controller too.)
# The path below should be writable by all users so that their
# profile directory may be created the first time they log on
;[profiles]
; comment = Users profiles
; path = /home/samba/profiles
; guest ok = no
; browseable = no
; create mask = 0600
; directory mask = 0700

[printers]
comment = All Printers
browseable = no
path = /var/spool/samba
printable = yes
guest ok = no
read only = yes
create mask = 0700

# Windows clients look for this share name as a source of downloadable
# printer drivers
[print$]
comment = Printer Drivers
path = /var/lib/samba/printers
browseable = yes
read only = yes
guest ok = no
# Uncomment to allow remote administration of Windows print drivers.
# You may need to replace 'lpadmin' with the name of the group your
# admin users are members of.
# Please note that you also need to set appropriate Unix permissions
# to the drivers directory for these users to have write rights in it
; write list = root, @lpadmin

# A sample share for sharing your CD-ROM with others.
;[cdrom]
; comment = Samba server's CD-ROM
; read only = yes
; locking = no
; path = /cdrom
; guest ok = yes

# The next two parameters show how to auto-mount a CD-ROM when the
# cdrom share is accesed. For this to work /etc/fstab must contain
# an entry like this:
#
# /dev/scd0 /cdrom iso9660 defaults,noauto,ro,user 0 0
#
# The CD-ROM gets unmounted automatically after the connection to the
#
# If you don't want to use auto-mounting/unmounting make sure the CD
# is mounted on /cdrom
#
; preexec = /bin/mount /cdrom
; postexec = /bin/umount /cdrom


Répondre

Revenir vers « Réseau sous GNU/Linux »