HP envy m6 radeon & buntu

Votre carte vidéo, carte son, imprimante n'est pas reconnue ?

Modérateur : Mods GNU/Linux

Avatar de l’utilisateur
nam1962
Amateur Expert
Amateur Expert
Messages : 180
Inscription : 01 mars 2014 22:34
Contact :

HP envy m6 radeon & buntu

Message par nam1962 » 27 mars 2014 15:26

Petit "mind breaker" que j'ai posé (sans résultat pour le moment) sur le forum Ubuntu : comment activer la radeon d'une envy m6 ?

Depuis un an je n'ai jamais réussi à faire tourner rond la config graphique de mon envy M6 :

Code : Tout sélectionner

:~$ lspci | grep "VGA compatible controller"
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Thames [Radeon HD 7500M/7600M Series]
Toutes mes tentatives d'installer fglrx se sont soldées par des plantages et même des besoins de tout réinstaller (plus moyen d'accéder à quoi que ce soit.)
Je suis donc privé de ma radéon.
Privé aussi de la soluce hybrid graphic d'Alberto Milone : http://albertomilone.com/?p=591
Récemment, suite à une maj en Trusty j'ai même du reinstaller en nomodeset.
En plus de ne pouvoir activer la Radeon, j'ai un souci de agpgart module.

voici mon dmesg :

Code : Tout sélectionner

[    0.000000] ACPI: SSDT 000000003afda000 000B22 (v01 HPQOEM 18A4     00003000 ACPI 00040000)
[    0.000000] ACPI: SSDT 000000003afd6000 001F1F (v01 HPQOEM 18A4     00001000 ACPI 00040000)
[    0.000000] ACPI: UEFI 000000003afd9000 00005C (v01 HPQOEM 18A4     00000000 HP   00040000)
[    0.000000] ACPI: BGRT 000000003afd8000 000038 (v01 HPQOEM 18A4     00000001 HP   00040000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000023f5fffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x23f5fffff]
[    0.000000]   NODE_DATA [mem 0x23f5f7000-0x23f5fbfff]
[    0.000000]  [ffffea0000000000-ffffea0008ffffff] PMD -> [ffff880238c00000-ffff88023ebfffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x23f5fffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x00087fff]
[    0.000000]   node   0: [mem 0x00100000-0x1fffffff]
[    0.000000]   node   0: [mem 0x20200000-0x3a4befff]
[    0.000000]   node   0: [mem 0x3afff000-0x3affffff]
[    0.000000]   node   0: [mem 0x100000000-0x23f5fffff]
[    0.000000] On node 0 totalpages: 1546311
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 135 pages reserved
[    0.000000]   DMA zone: 3975 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 3659 pages used for memmap
[    0.000000]   DMA32 zone: 234176 pages, LIFO batch:31
[    0.000000]   Normal zone: 20440 pages used for memmap
[    0.000000]   Normal zone: 1308160 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[    0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: [mem 0x00088000-0x000bffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000c0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x3a4bf000-0x3a8befff]
[    0.000000] PM: Registered nosave memory: [mem 0x3a8bf000-0x3aebefff]
[    0.000000] PM: Registered nosave memory: [mem 0x3aebf000-0x3afbefff]
[    0.000000] PM: Registered nosave memory: [mem 0x3afbf000-0x3affefff]
[    0.000000] PM: Registered nosave memory: [mem 0x3b000000-0x3f9fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x3fa00000-0xdfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfeafffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffb7ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xffb80000-0xffffffff]
[    0.000000] e820: [mem 0x3fa00000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] PERCPU: Embedded 29 pages/cpu @ffff88023f200000 s86336 r8192 d24256 u262144
[    0.000000] pcpu-alloc: s86336 r8192 d24256 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1522013
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-19-generic root=UUID=16b1670b-e7b4-4ca1-ac93-07b3ec6dddd6 ro quiet splash nomodeset vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 5919676K/6185244K available (7320K kernel code, 1138K rwdata, 3384K rodata, 1336K init, 1440K bss, 265568K reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
[    0.000000] 	Offload RCU callbacks from all CPUs
[    0.000000] 	Offload RCU callbacks from CPUs: 0-7.
[    0.000000] NR_IRQS:16640 nr_irqs:744 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 25165824 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.004000] tsc: Detected 2394.586 MHz processor
[    0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4789.17 BogoMIPS (lpj=9578344)
[    0.000005] pid_max: default: 32768 minimum: 301
[    0.000019] init_memory_mapping: [mem 0x3a4bf000-0x3a8befff]
[    0.000020]  [mem 0x3a4bf000-0x3a5fffff] page 4k
[    0.000022]  [mem 0x3a600000-0x3a7fffff] page 2M
[    0.000022]  [mem 0x3a800000-0x3a8befff] page 4k
[    0.000046] init_memory_mapping: [mem 0x3a8bf000-0x3aabefff]
[    0.000048]  [mem 0x3a8bf000-0x3aabefff] page 4k
[    0.033850] Security Framework initialized
[    0.033871] AppArmor: AppArmor initialized
[    0.033872] Yama: becoming mindful.
[    0.034449] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.036100] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.036822] Mount-cache hash table entries: 256
[    0.036987] Initializing cgroup subsys memory
[    0.036992] Initializing cgroup subsys devices
[    0.036993] Initializing cgroup subsys freezer
[    0.036995] Initializing cgroup subsys blkio
[    0.036996] Initializing cgroup subsys perf_event
[    0.036998] Initializing cgroup subsys hugetlb
[    0.037018] CPU: Physical Processor ID: 0
[    0.037019] CPU: Processor Core ID: 0
[    0.037023] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.037023] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.037026] mce: CPU supports 7 MCE banks
[    0.037037] CPU0: Thermal monitoring enabled (TM1)
[    0.037045] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
[    0.037045] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
[    0.037045] tlb_flushall_shift: 5
[    0.037162] Freeing SMP alternatives memory: 28K (ffffffff81e6c000 - ffffffff81e73000)
[    0.038606] ACPI: Core revision 20131115
[    0.046318] ACPI: All ACPI Tables successfully acquired
[    0.062732] ftrace: allocating 28370 entries in 111 pages
[    0.077359] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.117080] smpboot: CPU0: Intel(R) Core(TM) i3-2370M CPU @ 2.40GHz (fam: 06, model: 2a, stepping: 07)
[    0.117088] TSC deadline timer enabled
[    0.119321] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver.
[    0.119329] ... version:                3
[    0.119331] ... bit width:              48
[    0.119332] ... generic registers:      4
[    0.119333] ... value mask:             0000ffffffffffff
[    0.119334] ... max period:             0000ffffffffffff
[    0.119335] ... fixed-purpose events:   3
[    0.119336] ... event mask:             000000070000000f
[    0.120898] x86: Booting SMP configuration:
[    0.134052] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.144640] CPU2 microcode updated early to revision 0x29, date = 2013-06-12
[    0.120900] .... node  #0, CPUs:      #1 #2 #3
[    0.160460] x86: Booted up 1 node, 4 CPUs
[    0.160463] smpboot: Total of 4 processors activated (19156.68 BogoMIPS)
[    0.163679] devtmpfs: initialized
[    0.166132] EVM: security.selinux
[    0.166134] EVM: security.SMACK64
[    0.166135] EVM: security.ima
[    0.166136] EVM: security.capability
[    0.166183] PM: Registering ACPI NVS region [mem 0x3aebf000-0x3afbefff] (1048576 bytes)
[    0.167016] pinctrl core: initialized pinctrl subsystem
[    0.167071] regulator-dummy: no parameters
[    0.167101] RTC time: 16:08:10, date: 03/26/14
[    0.167133] NET: Registered protocol family 16
[    0.167228] cpuidle: using governor ladder
[    0.167230] cpuidle: using governor menu
[    0.167267] ACPI: bus type PCI registered
[    0.167269] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.167328] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.167330] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.187706] PCI: Using configuration type 1 for base access
[    0.188556] bio: create slab <bio-0> at 0
[    0.188701] ACPI: Added _OSI(Module Device)
[    0.188703] ACPI: Added _OSI(Processor Device)
[    0.188704] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.188706] ACPI: Added _OSI(Processor Aggregator Device)
[    0.193366] ACPI: Executed 1 blocks of module-level executable AML code
[    0.198035] ACPI: SSDT 000000003ae19018 00083B (v01  PmRef  Cpu0Cst 00003001 INTL 20120913)
[    0.198578] ACPI: Dynamic OEM Table Load:
[    0.198580] ACPI: SSDT           (null) 00083B (v01  PmRef  Cpu0Cst 00003001 INTL 20120913)
[    0.200797] ACPI: SSDT 000000003ae5ba98 000303 (v01  PmRef    ApIst 00003000 INTL 20120913)
[    0.201365] ACPI: Dynamic OEM Table Load:
[    0.201367] ACPI: SSDT           (null) 000303 (v01  PmRef    ApIst 00003000 INTL 20120913)
[    0.204695] ACPI: SSDT 000000003ae18d98 000119 (v01  PmRef    ApCst 00003000 INTL 20120913)
[    0.205232] ACPI: Dynamic OEM Table Load:
[    0.205234] ACPI: SSDT           (null) 000119 (v01  PmRef    ApCst 00003000 INTL 20120913)
[    0.209529] ACPI: Interpreter enabled
[    0.209536] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
[    0.209542] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
[    0.209556] ACPI: (supports S0 S3 S4 S5)
[    0.209558] ACPI: Using IOAPIC for interrupt routing
[    0.209584] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.212825] ACPI: ACPI Dock Station Driver: 1 docks/bays found
[    0.436828] ACPI: Power Resource [FN00] (off)
[    0.436942] ACPI: Power Resource [FN01] (off)
[    0.437050] ACPI: Power Resource [FN02] (off)
[    0.437155] ACPI: Power Resource [FN03] (off)
[    0.437261] ACPI: Power Resource [FN04] (off)
[    0.437914] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    0.437919] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.438034] \_SB_.PCI0:_OSC invalid UUID
[    0.438035] _OSC request data:1 1f 0 
[    0.438039] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[    0.438504] PCI host bridge to bus 0000:00
[    0.438507] pci_bus 0000:00: root bus resource [bus 00-fe]
[    0.438509] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.438511] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.438513] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.438515] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
[    0.438517] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
[    0.438518] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
[    0.438520] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff]
[    0.438522] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[    0.438523] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[    0.438525] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[    0.438527] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[    0.438528] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[    0.438530] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
[    0.438532] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff]
[    0.438533] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff]
[    0.438535] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff]
[    0.438537] pci_bus 0000:00: root bus resource [mem 0x3fa00000-0xfeafffff]
[    0.438545] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
[    0.438632] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
[    0.438664] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.438707] pci 0000:00:01.0: System wakeup disabled by ACPI
[    0.438739] pci 0000:00:02.0: [8086:0116] type 00 class 0x030000
[    0.438750] pci 0000:00:02.0: reg 0x10: [mem 0x61000000-0x613fffff 64bit]
[    0.438757] pci 0000:00:02.0: reg 0x18: [mem 0x50000000-0x5fffffff 64bit pref]
[    0.438761] pci 0000:00:02.0: reg 0x20: [io  0x4000-0x403f]
[    0.438862] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[    0.438887] pci 0000:00:14.0: reg 0x10: [mem 0x61700000-0x6170ffff 64bit]
[    0.438961] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.439030] pci 0000:00:14.0: System wakeup disabled by ACPI
[    0.439063] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[    0.439089] pci 0000:00:16.0: reg 0x10: [mem 0x61714000-0x6171400f 64bit]
[    0.439169] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.439254] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[    0.439276] pci 0000:00:1a.0: reg 0x10: [mem 0x61719000-0x617193ff]
[    0.439370] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.439430] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    0.439463] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[    0.439481] pci 0000:00:1b.0: reg 0x10: [mem 0x61710000-0x61713fff 64bit]
[    0.439552] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.439601] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.439630] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[    0.439711] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.439762] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.439791] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
[    0.439873] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.439928] pci 0000:00:1c.1: System wakeup disabled by ACPI
[    0.439968] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[    0.439991] pci 0000:00:1d.0: reg 0x10: [mem 0x61718000-0x617183ff]
[    0.440085] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.440157] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.440192] pci 0000:00:1f.0: [8086:1e57] type 00 class 0x060100
[    0.440368] pci 0000:00:1f.2: [8086:282a] type 00 class 0x010400
[    0.440388] pci 0000:00:1f.2: reg 0x10: [io  0x4088-0x408f]
[    0.440397] pci 0000:00:1f.2: reg 0x14: [io  0x4094-0x4097]
[    0.440405] pci 0000:00:1f.2: reg 0x18: [io  0x4080-0x4087]
[    0.440414] pci 0000:00:1f.2: reg 0x1c: [io  0x4090-0x4093]
[    0.440423] pci 0000:00:1f.2: reg 0x20: [io  0x4060-0x407f]
[    0.440432] pci 0000:00:1f.2: reg 0x24: [mem 0x61717000-0x617177ff]
[    0.440480] pci 0000:00:1f.2: PME# supported from D3hot
[    0.440550] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[    0.440567] pci 0000:00:1f.3: reg 0x10: [mem 0x61715000-0x617150ff 64bit]
[    0.440589] pci 0000:00:1f.3: reg 0x20: [io  0x4040-0x405f]
[    0.440730] pci 0000:01:00.0: [1002:6840] type 00 class 0x030000
[    0.440741] pci 0000:01:00.0: reg 0x10: [mem 0x40000000-0x4fffffff 64bit pref]
[    0.440750] pci 0000:01:00.0: reg 0x18: [mem 0x60000000-0x6001ffff 64bit]
[    0.440756] pci 0000:01:00.0: reg 0x20: [io  0x3000-0x30ff]
[    0.440766] pci 0000:01:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
[    0.440796] pci 0000:01:00.0: supports D1 D2
[    0.440862] pci 0000:01:00.0: System wakeup disabled by ACPI
[    0.447935] pci 0000:00:01.0: PCI bridge to [bus 01-06]
[    0.447944] pci 0000:00:01.0:   bridge window [io  0x3000-0x3fff]
[    0.447952] pci 0000:00:01.0:   bridge window [mem 0x60000000-0x60ffffff]
[    0.447962] pci 0000:00:01.0:   bridge window [mem 0x40000000-0x4fffffff 64bit pref]
[    0.448099] pci 0000:07:00.0: [10ec:5289] type 00 class 0xff0000
[    0.448121] pci 0000:07:00.0: reg 0x10: [mem 0x61600000-0x6160ffff]
[    0.448280] pci 0000:07:00.0: supports D1 D2
[    0.448282] pci 0000:07:00.0: PME# supported from D1 D2 D3hot D3cold
[    0.448361] pci 0000:07:00.2: [10ec:8168] type 00 class 0x020000
[    0.448383] pci 0000:07:00.2: reg 0x10: [io  0x2000-0x20ff]
[    0.448419] pci 0000:07:00.2: reg 0x18: [mem 0x61404000-0x61404fff 64bit pref]
[    0.448442] pci 0000:07:00.2: reg 0x20: [mem 0x61400000-0x61403fff 64bit pref]
[    0.448537] pci 0000:07:00.2: supports D1 D2
[    0.448538] pci 0000:07:00.2: PME# supported from D0 D1 D2 D3hot D3cold
[    0.448589] pci 0000:07:00.2: System wakeup disabled by ACPI
[    0.455968] pci 0000:00:1c.0: PCI bridge to [bus 07]
[    0.455978] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.455988] pci 0000:00:1c.0:   bridge window [mem 0x61600000-0x616fffff]
[    0.456003] pci 0000:00:1c.0:   bridge window [mem 0x61400000-0x614fffff 64bit pref]
[    0.456138] pci 0000:08:00.0: [1814:3290] type 00 class 0x028000
[    0.456160] pci 0000:08:00.0: reg 0x10: [mem 0x61510000-0x6151ffff]
[    0.456303] pci 0000:08:00.0: PME# supported from D0 D3hot
[    0.456334] pci 0000:08:00.0: System wakeup disabled by ACPI
[    0.456392] pci 0000:08:00.1: [1814:3298] type 00 class 0x0d1100
[    0.456413] pci 0000:08:00.1: reg 0x10: [mem 0x61500000-0x6150ffff]
[    0.456557] pci 0000:08:00.1: supports D1
[    0.456558] pci 0000:08:00.1: PME# supported from D0 D1 D3hot
[    0.464002] pci 0000:00:1c.1: PCI bridge to [bus 08]
[    0.464018] pci 0000:00:1c.1:   bridge window [mem 0x61500000-0x615fffff]
[    0.536655] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.536709] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.536762] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.536813] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.536864] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.536915] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.536965] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.537015] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.537449] ACPI: Enabled 5 GPEs in block 00 to 3F
[    0.537455] ACPI: \_SB_.PCI0: notify handler is installed
[    0.537523] Found 1 acpi root devices
[    0.537561] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[    0.537653] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.537658] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
[    0.537660] vgaarb: loaded
[    0.537661] vgaarb: bridge control possible 0000:01:00.0
[    0.537662] vgaarb: no bridge control possible 0000:00:02.0
[    0.537802] SCSI subsystem initialized
[    0.537852] libata version 3.00 loaded.
[    0.537868] ACPI: bus type USB registered
[    0.537882] usbcore: registered new interface driver usbfs
[    0.537889] usbcore: registered new interface driver hub
[    0.537910] usbcore: registered new device driver usb
[    0.538011] PCI: Using ACPI for IRQ routing
[    0.544649] PCI: pci_cache_line_size set to 64 bytes
[    0.544710] e820: reserve RAM buffer [mem 0x00088000-0x0008ffff]
[    0.544712] e820: reserve RAM buffer [mem 0x3a4bf000-0x3bffffff]
[    0.544714] e820: reserve RAM buffer [mem 0x3b000000-0x3bffffff]
[    0.544715] e820: reserve RAM buffer [mem 0x23f600000-0x23fffffff]
[    0.544788] NetLabel: Initializing
[    0.544790] NetLabel:  domain hash size = 128
[    0.544790] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.544803] NetLabel:  unlabeled traffic allowed by default
[    0.544858] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.544864] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.547898] Switched to clocksource hpet
[    0.552449] AppArmor: AppArmor Filesystem Enabled
[    0.552476] pnp: PnP ACPI init
[    0.552489] ACPI: bus type PNP registered
[    0.552523] pnp 00:00: [dma 4]
[    0.552541] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.552561] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
[    0.552658] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.552689] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.552729] system 00:04: [io  0x0680-0x069f] has been reserved
[    0.552732] system 00:04: [io  0x1000-0x100f] has been reserved
[    0.552734] system 00:04: [io  0xffff] has been reserved
[    0.552737] system 00:04: [io  0xffff] has been reserved
[    0.552739] system 00:04: [io  0x0400-0x0453] could not be reserved
[    0.552741] system 00:04: [io  0x0458-0x047f] has been reserved
[    0.552743] system 00:04: [io  0x0500-0x057f] has been reserved
[    0.552745] system 00:04: [io  0x164e-0x164f] has been reserved
[    0.552748] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.552770] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.552816] system 00:06: [io  0x0454-0x0457] has been reserved
[    0.552818] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.552850] pnp 00:07: Plug and Play ACPI device, IDs HPQ8001 PNP0303 (active)
[    0.552877] pnp 00:08: Plug and Play ACPI device, IDs SYN1e76 SYN1e00 SYN0002 PNP0f13 (active)
[    0.624141] pnp 00:09: Plug and Play ACPI device, IDs HPQ0004 (active)
[    0.624258] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.624260] system 00:0a: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.624262] system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.624264] system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.624266] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
[    0.624268] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.624270] system 00:0a: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.624272] system 00:0a: [mem 0xff000000-0xff000fff] has been reserved
[    0.624274] system 00:0a: [mem 0xff010000-0xffffffff] could not be reserved
[    0.624276] system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.624278] system 00:0a: [mem 0x3fa00000-0x3fa00fff] has been reserved
[    0.624281] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.624629] pnp 00:0b: disabling [mem 0x40000000-0x401fffff] because it overlaps 0000:00:01.0 BAR 15 [mem 0x40000000-0x4fffffff 64bit pref]
[    0.624635] pnp 00:0b: disabling [mem 0x40000000-0x401fffff disabled] because it overlaps 0000:01:00.0 BAR 0 [mem 0x40000000-0x4fffffff 64bit pref]
[    0.624660] system 00:0b: [mem 0x20000000-0x201fffff] has been reserved
[    0.624663] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.624751] pnp: PnP ACPI: found 12 devices
[    0.624752] ACPI: bus type PNP unregistered
[    0.630882] pci 0000:01:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
[    0.630909] pci 0000:01:00.0: BAR 6: assigned [mem 0x60020000-0x6003ffff pref]
[    0.630912] pci 0000:00:01.0: PCI bridge to [bus 01-06]
[    0.630915] pci 0000:00:01.0:   bridge window [io  0x3000-0x3fff]
[    0.630918] pci 0000:00:01.0:   bridge window [mem 0x60000000-0x60ffffff]
[    0.630921] pci 0000:00:01.0:   bridge window [mem 0x40000000-0x4fffffff 64bit pref]
[    0.630925] pci 0000:00:1c.0: PCI bridge to [bus 07]
[    0.630928] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.630933] pci 0000:00:1c.0:   bridge window [mem 0x61600000-0x616fffff]
[    0.630938] pci 0000:00:1c.0:   bridge window [mem 0x61400000-0x614fffff 64bit pref]
[    0.630945] pci 0000:00:1c.1: PCI bridge to [bus 08]
[    0.630950] pci 0000:00:1c.1:   bridge window [mem 0x61500000-0x615fffff]
[    0.630960] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.630962] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.630964] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.630966] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
[    0.630968] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
[    0.630969] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
[    0.630971] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff]
[    0.630973] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff]
[    0.630974] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff]
[    0.630976] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff]
[    0.630978] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff]
[    0.630979] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff]
[    0.630981] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff]
[    0.630983] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff]
[    0.630985] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff]
[    0.630986] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff]
[    0.630988] pci_bus 0000:00: resource 20 [mem 0x3fa00000-0xfeafffff]
[    0.630990] pci_bus 0000:01: resource 0 [io  0x3000-0x3fff]
[    0.630992] pci_bus 0000:01: resource 1 [mem 0x60000000-0x60ffffff]
[    0.630993] pci_bus 0000:01: resource 2 [mem 0x40000000-0x4fffffff 64bit pref]
[    0.630995] pci_bus 0000:07: resource 0 [io  0x2000-0x2fff]
[    0.630997] pci_bus 0000:07: resource 1 [mem 0x61600000-0x616fffff]
[    0.630999] pci_bus 0000:07: resource 2 [mem 0x61400000-0x614fffff 64bit pref]
[    0.631001] pci_bus 0000:08: resource 1 [mem 0x61500000-0x615fffff]
[    0.631028] NET: Registered protocol family 2
[    0.631197] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.631355] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.631486] TCP: Hash tables configured (established 65536 bind 65536)
[    0.631510] TCP: reno registered
[    0.631523] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.631554] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.631631] NET: Registered protocol family 1
[    0.631645] pci 0000:00:02.0: Boot video device
[    1.016490] PCI: CLS 64 bytes, default 64
[    1.016554] Trying to unpack rootfs image as initramfs...
[    1.307276] Freeing initrd memory: 18352K (ffff880035b7e000 - ffff880036d6a000)
[    1.307281] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.307284] software IO TLB [mem 0x31b7e000-0x35b7e000] (64MB) mapped at [ffff880031b7e000-ffff880035b7dfff]
[    1.307325] Simple Boot Flag at 0x44 set to 0x1
[    1.307507] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x29
[    1.307513] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x29
[    1.307519] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x29
[    1.307527] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x29
[    1.307581] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    1.307582] Scanning for low memory corruption every 60 seconds
[    1.307857] Initialise system trusted keyring
[    1.307902] audit: initializing netlink socket (disabled)
[    1.307917] type=2000 audit(1395850091.280:1): initialized
[    1.333831] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.334845] zbud: loaded
[    1.334981] VFS: Disk quotas dquot_6.5.2
[    1.335017] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.335381] fuse init (API version 7.22)
[    1.335447] msgmni has been set to 11724
[    1.335491] Key type big_key registered
[    1.335909] Key type asymmetric registered
[    1.335911] Asymmetric key parser 'x509' registered
[    1.335938] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    1.335976] io scheduler noop registered
[    1.335979] io scheduler deadline registered (default)
[    1.336000] io scheduler cfq registered
[    1.336058] pcieport 0000:00:01.0: device [8086:0101] has invalid IRQ; check vendor BIOS
[    1.336182] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    1.336219] pcieport 0000:00:1c.0: device [8086:1e10] has invalid IRQ; check vendor BIOS
[    1.336337] pcieport 0000:00:1c.1: device [8086:1e12] has invalid IRQ; check vendor BIOS
[    1.336461] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.336473] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.336508] efifb: probing for efifb
[    1.336892] efifb: framebuffer at 0x50000000, mapped to 0xffffc90021400000, using 4160k, total 4160k
[    1.336894] efifb: mode is 1366x768x32, linelength=5504, pages=1
[    1.336894] efifb: scrolling: redraw
[    1.336896] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    1.339453] Console: switching to colour frame buffer device 170x48
[    1.341850] fb0: EFI VGA frame buffer device
[    1.341859] intel_idle: MWAIT substates: 0x21120
[    1.341861] intel_idle: v0.4 model 0x2A
[    1.341862] intel_idle: lapic_timer_reliable_states 0xffffffff
[    1.341953] ipmi message handler version 39.2
[    1.342033] ACPI: AC Adapter [ACAD] (on-line)
[    1.342116] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0C:00/input/input0
[    1.342120] ACPI: Power Button [PWRB]
[    1.342161] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[    1.342255] ACPI: Lid Switch [LID0]
[    1.342309] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    1.342312] ACPI: Power Button [PWRF]
[    1.342402] ACPI: Fan [FAN0] (off)
[    1.342472] ACPI: Fan [FAN1] (off)
[    1.342539] ACPI: Fan [FAN2] (off)
[    1.342618] ACPI: Fan [FAN3] (off)
[    1.342689] ACPI: Fan [FAN4] (off)
[    1.342760] pci 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[    1.342769] pci 0000:00:00.0: no hotplug settings from platform
[    1.342771] pci 0000:00:00.0: using default PCI settings
[    1.342776] pcieport 0000:00:01.0: no hotplug settings from platform
[    1.342782] pci 0000:01:00.0: no hotplug settings from platform
[    1.342784] pci 0000:00:02.0: no hotplug settings from platform
[    1.342785] pci 0000:00:02.0: using default PCI settings
[    1.342790] pci 0000:00:14.0: no hotplug settings from platform
[    1.342791] pci 0000:00:14.0: using default PCI settings
[    1.342798] pci 0000:00:16.0: no hotplug settings from platform
[    1.342800] pci 0000:00:16.0: using default PCI settings
[    1.342807] pci 0000:00:1a.0: no hotplug settings from platform
[    1.342809] pci 0000:00:1a.0: using default PCI settings
[    1.342817] pci 0000:00:1b.0: no hotplug settings from platform
[    1.342819] pcieport 0000:00:1c.0: no hotplug settings from platform
[    1.342830] pci 0000:07:00.0: no hotplug settings from platform
[    1.342840] pci 0000:07:00.2: no hotplug settings from platform
[    1.342842] pcieport 0000:00:1c.1: no hotplug settings from platform
[    1.342853] pci 0000:08:00.0: no hotplug settings from platform
[    1.342862] pci 0000:08:00.1: no hotplug settings from platform
[    1.342865] pci 0000:00:1d.0: no hotplug settings from platform
[    1.342867] pci 0000:00:1d.0: using default PCI settings
[    1.342874] pci 0000:00:1f.0: no hotplug settings from platform
[    1.342875] pci 0000:00:1f.0: using default PCI settings
[    1.342884] pci 0000:00:1f.2: no hotplug settings from platform
[    1.342885] pci 0000:00:1f.2: using default PCI settings
[    1.342892] pci 0000:00:1f.3: no hotplug settings from platform
[    1.342893] pci 0000:00:1f.3: using default PCI settings
[    1.343374] thermal LNXTHERM:00: registered as thermal_zone0
[    1.343376] ACPI: Thermal Zone [TZ00] (71 C)
[    1.343610] thermal LNXTHERM:01: registered as thermal_zone1
[    1.343612] ACPI: Thermal Zone [TZ01] (71 C)
[    1.343664] thermal LNXTHERM:02: registered as thermal_zone2
[    1.343666] ACPI: Thermal Zone [TZ02] (28 C)
[    1.343696] GHES: HEST is not enabled!
[    1.343786] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.584829] [Firmware Bug]: battery: (dis)charge rate invalid.
[    1.584852] ACPI: Battery Slot [BAT1] (battery present)
[    1.584943] Linux agpgart interface v0.103
[    1.586678] brd: module loaded
[    1.587211] loop: module loaded
[    1.587498] libphy: Fixed MDIO Bus: probed
[    1.587569] tun: Universal TUN/TAP device driver, 1.6
[    1.587570] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.587608] PPP generic driver version 2.4.2
[    1.587641] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.587645] ehci-pci: EHCI PCI platform driver
[    1.587765] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    1.587771] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    1.587785] ehci-pci 0000:00:1a.0: debug port 2
[    1.591681] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    1.591698] ehci-pci 0000:00:1a.0: irq 16, io mem 0x61719000
[    1.600810] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    1.600849] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.600851] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.600853] usb usb1: Product: EHCI Host Controller
[    1.600855] usb usb1: Manufacturer: Linux 3.13.0-19-generic ehci_hcd
[    1.600856] usb usb1: SerialNumber: 0000:00:1a.0
[    1.600986] hub 1-0:1.0: USB hub found
[    1.600993] hub 1-0:1.0: 2 ports detected
[    1.601166] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    1.601170] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.601183] ehci-pci 0000:00:1d.0: debug port 2
[    1.605088] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    1.605101] ehci-pci 0000:00:1d.0: irq 20, io mem 0x61718000
[    1.616822] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.616859] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.616861] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.616862] usb usb2: Product: EHCI Host Controller
[    1.616864] usb usb2: Manufacturer: Linux 3.13.0-19-generic ehci_hcd
[    1.616866] usb usb2: SerialNumber: 0000:00:1d.0
[    1.616985] hub 2-0:1.0: USB hub found
[    1.616992] hub 2-0:1.0: 2 ports detected
[    1.617066] ehci-platform: EHCI generic platform driver
[    1.617072] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.617073] ohci-pci: OHCI PCI platform driver
[    1.617080] ohci-platform: OHCI generic platform driver
[    1.617085] uhci_hcd: USB Universal Host Controller Interface driver
[    1.617194] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.617200] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[    1.617295] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    1.617317] xhci_hcd 0000:00:14.0: irq 41 for MSI/MSI-X
[    1.617380] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    1.617381] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.617383] usb usb3: Product: xHCI Host Controller
[    1.617385] usb usb3: Manufacturer: Linux 3.13.0-19-generic xhci_hcd
[    1.617386] usb usb3: SerialNumber: 0000:00:14.0
[    1.617498] hub 3-0:1.0: USB hub found
[    1.617508] hub 3-0:1.0: 4 ports detected
[    1.617810] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.617814] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[    1.617852] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    1.617854] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.617856] usb usb4: Product: xHCI Host Controller
[    1.617857] usb usb4: Manufacturer: Linux 3.13.0-19-generic xhci_hcd
[    1.617859] usb usb4: SerialNumber: 0000:00:14.0
[    1.617969] hub 4-0:1.0: USB hub found
[    1.617979] hub 4-0:1.0: 4 ports detected
[    1.624983] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.667054] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.667058] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.667339] mousedev: PS/2 mouse device common for all mice
[    1.670591] rtc_cmos 00:05: RTC can wake from S4
[    1.670739] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[    1.670769] rtc_cmos 00:05: alarms up to one month, 242 bytes nvram, hpet irqs
[    1.670819] device-mapper: uevent: version 1.0.3
[    1.670900] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[    1.670906] ledtrig-cpu: registered to indicate activity on CPUs
[    1.670908] EFI Variables Facility v0.08 2004-May-17
[    1.718470] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    1.913122] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.974845] TCP: cubic registered
[    1.974919] NET: Registered protocol family 10
[    1.975062] NET: Registered protocol family 17
[    1.975073] Key type dns_resolver registered
[    1.975582] Loading compiled-in X.509 certificates
[    1.976503] Loaded X.509 cert 'Magrathea: Glacier signing key: 21129319b0aadfa0b3fd115fdb0c4a5e269401d4'
[    1.976520] registered taskstats version 1
[    1.979303] Key type trusted registered
[    1.981244] Key type encrypted registered
[    1.983087] AppArmor: AppArmor sha1 policy hashing enabled
[    1.983091] IMA: No TPM chip found, activating TPM-bypass!
[    1.983490]   Magic number: 6:696:136
[    1.983504] block ram1: hash matches
[    1.983589] rtc_cmos 00:05: setting system clock to 2014-03-26 16:08:12 UTC (1395850092)
[    1.984199] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.984201] EDD information not available.
[    1.984237] PM: Hibernation image not present or could not be loaded.
[    1.985579] Freeing unused kernel memory: 1336K (ffffffff81d1e000 - ffffffff81e6c000)
[    1.985581] Write protecting the kernel read-only data: 12288k
[    1.987616] Freeing unused kernel memory: 860K (ffff880002729000 - ffff880002800000)
[    1.989228] Freeing unused kernel memory: 712K (ffff880002b4e000 - ffff880002c00000)
[    2.001811] systemd-udevd[125]: starting version 204
[    2.022534] rtsx_pci 0000:07:00.0: irq 42 for MSI/MSI-X
[    2.022554] rtsx_pci 0000:07:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 42
[    2.026562] ahci 0000:00:1f.2: version 3.0
[    2.026749] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
[    2.028633] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    2.028643] r8169 0000:07:00.2: can't disable ASPM; OS doesn't have ASPM control
[    2.028881] r8169 0000:07:00.2: irq 44 for MSI/MSI-X
[    2.029046] r8169 0000:07:00.2 eth0: RTL8411 at 0xffffc9000006e000, 84:34:97:14:24:7b, XID 08800800 IRQ 44
[    2.029048] r8169 0000:07:00.2 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    2.041221] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x7 impl RAID mode
[    2.041227] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst 
[    2.045502] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    2.045508] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.045664] hub 1-1:1.0: USB hub found
[    2.045750] hub 1-1:1.0: 6 ports detected
[    2.058103] scsi0 : ahci
[    2.058212] scsi1 : ahci
[    2.058562] scsi2 : ahci
[    2.059758] scsi3 : ahci
[    2.059840] scsi4 : ahci
[    2.059916] scsi5 : ahci
[    2.059970] ata1: SATA max UDMA/133 abar m2048@0x61717000 port 0x61717100 irq 43
[    2.059974] ata2: SATA max UDMA/133 abar m2048@0x61717000 port 0x61717180 irq 43
[    2.059979] ata3: SATA max UDMA/133 abar m2048@0x61717000 port 0x61717200 irq 43
[    2.059982] ata4: DUMMY
[    2.059983] ata5: DUMMY
[    2.059985] ata6: DUMMY
[    2.157384] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    2.289720] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    2.289728] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.289993] hub 2-1:1.0: USB hub found
[    2.290079] hub 2-1:1.0: 8 ports detected
[    2.305517] tsc: Refined TSC clocksource calibration: 2394.564 MHz
[    2.377579] ata2: SATA link down (SStatus 0 SControl 300)
[    2.377624] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.377646] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.379311] ata1.00: ATA-8: Hitachi HTS547575A9E384, JE4OA50A, max UDMA/100
[    2.379322] ata1.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    2.379544] ata3.00: ATAPI: hp      DVD RAM UJ8C2, 1.00, max UDMA/133
[    2.381046] ata1.00: configured for UDMA/100
[    2.381195] ata3.00: configured for UDMA/133
[    2.381347] scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS54757 JE4O PQ: 0 ANSI: 5
[    2.381509] sd 0:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
[    2.381513] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    2.381550] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.381563] sd 0:0:0:0: [sda] Write Protect is off
[    2.381567] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.381589] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.387267] scsi 2:0:0:0: CD-ROM            hp       DVD RAM UJ8C2    1.00 PQ: 0 ANSI: 5
[    2.391293] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.391302] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.391505] sr 2:0:0:0: Attached scsi CD-ROM sr0
[    2.391583] sr 2:0:0:0: Attached scsi generic sg1 type 5
[    2.417303]  sda: sda1 sda2 sda3 sda4
[    2.417670] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.457700] usb 3-2: new low-speed USB device number 2 using xhci_hcd
[    2.477594] usb 3-2: New USB device found, idVendor=093a, idProduct=2510
[    2.477605] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.477611] usb 3-2: Product: USB Optical Mouse
[    2.477616] usb 3-2: Manufacturer: PixArt
[    2.477788] usb 3-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[    2.481369] hidraw: raw HID events driver (C) Jiri Kosina
[    2.484830] usbcore: registered new interface driver usbhid
[    2.484832] usbhid: USB HID core driver
[    2.486318] input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0/input/input5
[    2.486428] hid-generic 0003:093A:2510.0001: input,hidraw0: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:14.0-2/input0
[    2.589808] usb 3-4: new full-speed USB device number 3 using xhci_hcd
[    2.607379] usb 3-4: New USB device found, idVendor=138a, idProduct=0018
[    2.607390] usb 3-4: New USB device strings: Mfr=0, Product=0, SerialNumber=1
[    2.607395] usb 3-4: SerialNumber: 47163a54f0d0
[    2.677789] usb 1-1.1: new high-speed USB device number 3 using ehci-pci
[    2.827699] usb 1-1.1: New USB device found, idVendor=064e, idProduct=c33c
[    2.827703] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.827705] usb 1-1.1: Product: HP Truevision HD
[    2.827707] usb 1-1.1: Manufacturer: SuYin
[    2.827708] usb 1-1.1: SerialNumber: HF1019-P62A-OV03-REV0201
[    2.907344] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[    3.306585] Switched to clocksource tsc
[    3.693552] random: init urandom read with 109 bits of entropy available
[    4.085263] random: nonblocking pool is initialized
[   13.922467] Adding 17577980k swap on /dev/sda3.  Priority:-1 extents:1 across:17577980k FS
[   14.062860] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   14.165308] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[   14.178753] systemd-udevd[327]: starting version 204
[   14.260144] lp: driver loaded but no devices found
[   14.349303] hp_accel: laptop model unknown, using default axes configuration
[   14.380821] wmi: Mapper loaded
[   14.384936] lis3lv02d: 8 bits 3DC sensor found
[   14.401285] [drm] Initialized drm 1.1.0 20060810
[   14.402601] mei_me 0000:00:16.0: irq 45 for MSI/MSI-X
[   14.410470] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251)
[   14.410479] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   14.410484] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIX 1 (20131115/utaddress-251)
[   14.410489] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPIO 2 (20131115/utaddress-251)
[   14.410494] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 3 (20131115/utaddress-251)
[   14.410499] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   14.410501] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIX 1 (20131115/utaddress-251)
[   14.410505] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPIO 2 (20131115/utaddress-251)
[   14.410510] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 3 (20131115/utaddress-251)
[   14.410514] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   14.410516] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   14.430292] cfg80211: Calling CRDA to update world regulatory domain
[   14.437119] [drm:drm_pci_agp_init] *ERROR* Cannot initialize the agpgart module.
[   14.455511] [drm] VGACON disable radeon kernel modesetting.
[   14.455514] [drm] radeon userspace modesetting enabled.
[   14.460060] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 3290, rev 0015 detected
[   14.463750] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 3290 detected
[   14.463931] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input6
[   14.464252] pci 0000:01:00.0: enabling device (0000 -> 0003)
[   14.464437] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   14.464440] [drm] No driver support for vblank timestamp query.
[   14.464443] [drm] Initialized radeon 1.34.0 20080528 for 0000:01:00.0 on minor 0
[   14.470309] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   14.559908] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[   14.572288] mute LED gpio 8 polarity 1
[   14.572474] autoconfig: line_outs=1 (0xd/0x0/0x0/0x0/0x0) type:speaker
[   14.572476]    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   14.572477]    hp_outs=1 (0xb/0x0/0x0/0x0/0x0)
[   14.572478]    mono: mono_out=0x0
[   14.572479]    inputs:
[   14.572481]      Internal Mic=0x11
[   14.572482]      Mic=0xa
[   14.605005] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   14.605097] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   14.605173] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   14.760502] type=1400 audit(1395850105.261:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=450 comm="apparmor_parser"
[   14.760511] type=1400 audit(1395850105.261:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=450 comm="apparmor_parser"
[   14.760517] type=1400 audit(1395850105.261:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=450 comm="apparmor_parser"
[   14.760526] type=1400 audit(1395850105.261:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=462 comm="apparmor_parser"
[   14.760534] type=1400 audit(1395850105.261:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=462 comm="apparmor_parser"
[   14.760541] type=1400 audit(1395850105.261:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=462 comm="apparmor_parser"
[   14.761045] type=1400 audit(1395850105.261:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=464 comm="apparmor_parser"
[   14.761052] type=1400 audit(1395850105.261:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=464 comm="apparmor_parser"
[   14.761057] type=1400 audit(1395850105.261:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=464 comm="apparmor_parser"
[   14.761102] type=1400 audit(1395850105.261:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=450 comm="apparmor_parser"
[   14.804490] ip_tables: (C) 2000-2006 Netfilter Core Team
[   14.814409] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[   14.831711] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   14.958663] cfg80211: World regulatory domain updated:
[   14.958666] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   14.958668] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   14.958670] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   14.958671] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   14.958673] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   14.958674] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   15.016452] input: HP WMI hotkeys as /devices/virtual/input/input8
[   15.580177] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[   15.959517] Linux video capture interface: v2.00
[   16.013328] uvcvideo: Found UVC 1.00 device HP Truevision HD (064e:c33c)
[   16.022123] input: HP Truevision HD as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input12
[   16.022320] usbcore: registered new interface driver uvcvideo
[   16.022323] USB Video Class driver (1.1.1)
[   16.223488] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00223/0x840300/0x26c00, board id: 2054, fw id: 1196324
[   16.346754] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
[   16.709111] init: udev-fallback-graphics main process (743) terminated with status 1
[   19.050159] init: failsafe main process (827) killed by TERM signal
[   19.513274] Bluetooth: Core ver 2.17
[   19.513298] NET: Registered protocol family 31
[   19.513301] Bluetooth: HCI device and connection manager initialized
[   19.513309] Bluetooth: HCI socket layer initialized
[   19.513313] Bluetooth: L2CAP socket layer initialized
[   19.513319] Bluetooth: SCO socket layer initialized
[   19.517459] Bluetooth: RFCOMM TTY layer initialized
[   19.517472] Bluetooth: RFCOMM socket layer initialized
[   19.517479] Bluetooth: RFCOMM ver 1.11
[   19.520702] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   19.520706] Bluetooth: BNEP filters: protocol multicast
[   19.520715] Bluetooth: BNEP socket layer initialized
[   19.741540] init: cups main process (988) killed by HUP signal
[   19.741553] init: cups main process ended, respawning
[   19.784429] audit_printk_skb: 135 callbacks suppressed
[   19.784434] type=1400 audit(1395850110.281:57): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="sanitized_helper" pid=975 comm="apparmor_parser"
[   19.785278] type=1400 audit(1395850110.281:58): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="sanitized_helper" pid=975 comm="apparmor_parser"
[   20.614044] type=1400 audit(1395850111.109:59): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cups-browsed" pid=1157 comm="apparmor_parser"
[   21.108385] r8169 0000:07:00.2 eth0: link down
[   21.108431] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   21.108721] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   21.110471] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt3290.bin'
[   21.302917] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.37
[   21.357859] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   21.358160] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   21.577415] init: samba-ad-dc main process (1167) terminated with status 1
[   22.539529] wlan0: authenticate with 00:24:d4:d4:78:b4
[   22.539618] wlan0: send auth to 00:24:d4:d4:78:b4 (try 1/3)
[   22.543408] wlan0: authenticated
[   22.546652] wlan0: associate with 00:24:d4:d4:78:b4 (try 1/3)
[   22.550557] wlan0: RX AssocResp from 00:24:d4:d4:78:b4 (capab=0x411 status=0 aid=4)
[   22.550851] wlan0: associated
[   22.550860] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   25.784684] nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.
[   26.225724] Non-volatile memory driver v1.3
[   26.510470] init: plymouth-stop pre-start process (1803) terminated with status 1
[   49.824021] type=1400 audit(1395850140.289:60): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2260 comm="apparmor_parser"
[   49.824031] type=1400 audit(1395850140.289:61): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2260 comm="apparmor_parser"
[   49.824460] type=1400 audit(1395850140.289:62): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2260 comm="apparmor_parser"
[ 1963.920520] [UFW BLOCK] IN=wlan0 OUT= MAC=a4:17:31:14:73:75:00:24:d4:ab:8f:19:08:00 SRC=192.168.0.254 DST=192.168.0.18 LEN=321 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=1900 DPT=43120 LEN=301 
[ 1963.920975] [UFW BLOCK] IN=wlan0 OUT= MAC=a4:17:31:14:73:75:00:24:d4:ab:8f:19:08:00 SRC=192.168.0.254 DST=192.168.0.18 LEN=321 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=1900 DPT=42218 LEN=301 
[ 1998.995520] [UFW BLOCK] IN=wlan0 OUT= MAC=a4:17:31:14:73:75:00:24:d4:ab:8f:19:08:00 SRC=192.168.0.254 DST=192.168.0.18 LEN=321 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=1900 DPT=42938 LEN=301 
[ 1998.996898] [UFW BLOCK] IN=wlan0 OUT= MAC=a4:17:31:14:73:75:00:24:d4:ab:8f:19:08:00 SRC=192.168.0.254 DST=192.168.0.18 LEN=321 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=1900 DPT=36392 LEN=301 
[ 2154.153579] [UFW BLOCK] IN=wlan0 OUT= MAC=a4:17:31:14:73:75:00:24:d4:ab:8f:19:08:00 SRC=192.168.0.254 DST=192.168.0.18 LEN=321 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=1900 DPT=50517 LEN=301 
[ 2154.153796] [UFW BLOCK] IN=wlan0 OUT= MAC=a4:17:31:14:73:75:00:24:d4:ab:8f:19:08:00 SRC=192.168.0.254 DST=192.168.0.18 LEN=321 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=1900 DPT=48721 LEN=301 
C'est bien HP qui fournit des ordis et des bios pourris : voilà ce qui arrive à ceux qui tournent en W8 : http://h30478.www3.hp.com/t5/Ordinateur ... d-p/225876 (j'ai le 1164sf, qui a manifestement la même revision bios et les mêmes cartes)
Pas mal, non ?

Une idée me sera précieuse !!!
Almanet doLys, Linux, open source et fintechs : mon tuto pour optimiser / finaliser une install
Xubuntu devel - Manjaro unstable - OpenSUSE tumbleweed Et vous ?
54 convertis GNU/Linux IRL (leur ai pas donné le choix, aussi...).
Un jeune site que j'aime bien, le top du T-shirt homme ...bio en plus : https://goudronblanc.com

Avatar de l’utilisateur
nam1962
Amateur Expert
Amateur Expert
Messages : 180
Inscription : 01 mars 2014 22:34
Contact :

Re: HP envy m6 radeon & buntu

Message par nam1962 » 27 mars 2014 15:27

Pour compléter l'info : lspci

Code : Tout sélectionner

:~$ lspci -v
00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)
	Subsystem: Hewlett-Packard Company Device 18a5
	Flags: bus master, fast devsel, latency 0
	Capabilities: <access denied>

00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09) (prog-if 00 [Normal decode])
	Flags: bus master, fast devsel, latency 0
	Bus: primary=00, secondary=01, subordinate=06, sec-latency=0
	I/O behind bridge: 00003000-00003fff
	Memory behind bridge: 60000000-60ffffff
	Prefetchable memory behind bridge: 0000000040000000-000000004fffffff
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) (prog-if 00 [VGA controller])
	Subsystem: Hewlett-Packard Company Device 18a5
	Flags: fast devsel, IRQ 16
	Memory at 61000000 (64-bit, non-prefetchable) [size=4M]
	Memory at 50000000 (64-bit, prefetchable) [size=256M]
	I/O ports at 4000 [size=64]
	Expansion ROM at <unassigned> [disabled]
	Capabilities: <access denied>

00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04) (prog-if 30 [XHCI])
	Subsystem: Hewlett-Packard Company Device 18a5
	Flags: bus master, medium devsel, latency 0, IRQ 41
	Memory at 61700000 (64-bit, non-prefetchable) [size=64K]
	Capabilities: <access denied>
	Kernel driver in use: xhci_hcd

00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04)
	Subsystem: Hewlett-Packard Company Device 18a5
	Flags: bus master, fast devsel, latency 0, IRQ 45
	Memory at 61714000 (64-bit, non-prefetchable) [size=16]
	Capabilities: <access denied>
	Kernel driver in use: mei_me

00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 (rev 04) (prog-if 20 [EHCI])
	Subsystem: Hewlett-Packard Company Device 18a5
	Flags: bus master, medium devsel, latency 0, IRQ 16
	Memory at 61719000 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ehci-pci

00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04)
	Subsystem: Hewlett-Packard Company Device 18a5
	Flags: bus master, fast devsel, latency 0, IRQ 46
	Memory at 61710000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: snd_hda_intel

00:1c.0 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 (rev c4) (prog-if 00 [Normal decode])
	Flags: bus master, fast devsel, latency 0
	Bus: primary=00, secondary=07, subordinate=07, sec-latency=0
	I/O behind bridge: 00002000-00002fff
	Memory behind bridge: 61600000-616fffff
	Prefetchable memory behind bridge: 0000000061400000-00000000614fffff
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:1c.1 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 (rev c4) (prog-if 00 [Normal decode])
	Flags: bus master, fast devsel, latency 0
	Bus: primary=00, secondary=08, subordinate=08, sec-latency=0
	Memory behind bridge: 61500000-615fffff
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 (rev 04) (prog-if 20 [EHCI])
	Subsystem: Hewlett-Packard Company Device 18a5
	Flags: bus master, medium devsel, latency 0, IRQ 20
	Memory at 61718000 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ehci-pci

00:1f.0 ISA bridge: Intel Corporation HM77 Express Chipset LPC Controller (rev 04)
	Subsystem: Hewlett-Packard Company Device 18a5
	Flags: bus master, medium devsel, latency 0
	Capabilities: <access denied>
	Kernel driver in use: lpc_ich

00:1f.2 RAID bus controller: Intel Corporation 82801 Mobile SATA Controller [RAID mode] (rev 04)
	Subsystem: Hewlett-Packard Company Device 18a5
	Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 42
	I/O ports at 4088 [size=8]
	I/O ports at 4094 [size=4]
	I/O ports at 4080 [size=8]
	I/O ports at 4090 [size=4]
	I/O ports at 4060 [size=32]
	Memory at 61717000 (32-bit, non-prefetchable) [size=2K]
	Capabilities: <access denied>
	Kernel driver in use: ahci

00:1f.3 SMBus: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller (rev 04)
	Subsystem: Hewlett-Packard Company Device 18a5
	Flags: medium devsel
	Memory at 61715000 (64-bit, non-prefetchable) [size=256]
	I/O ports at 4040 [size=32]

01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Thames [Radeon HD 7500M/7600M Series] (prog-if 00 [VGA controller])
	Subsystem: Hewlett-Packard Company Radeon HD 7670M
	Flags: bus master, fast devsel, latency 0, IRQ 16
	Memory at 40000000 (64-bit, prefetchable) [size=256M]
	Memory at 60000000 (64-bit, non-prefetchable) [size=128K]
	I/O ports at 3000 [size=256]
	Expansion ROM at 60020000 [disabled] [size=128K]
	Capabilities: <access denied>

07:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. Device 5289 (rev 01)
	Subsystem: Hewlett-Packard Company Device 18a5
	Flags: bus master, fast devsel, latency 0, IRQ 43
	Memory at 61600000 (32-bit, non-prefetchable) [size=64K]
	Capabilities: <access denied>
	Kernel driver in use: rtsx_pci

07:00.2 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 0a)
	Subsystem: Hewlett-Packard Company Device 18a5
	Flags: bus master, fast devsel, latency 0, IRQ 44
	I/O ports at 2000 [size=256]
	Memory at 61404000 (64-bit, prefetchable) [size=4K]
	Memory at 61400000 (64-bit, prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: r8169

08:00.0 Network controller: Ralink corp. RT3290 Wireless 802.11n 1T/1R PCIe
	Subsystem: Hewlett-Packard Company Ralink RT3290LE 802.11bgn 1x1 Wi-Fi and Bluetooth 4.0 Combo Adapter
	Flags: bus master, fast devsel, latency 0, IRQ 17
	Memory at 61510000 (32-bit, non-prefetchable) [size=64K]
	Capabilities: <access denied>
	Kernel driver in use: rt2800pci

08:00.1 Bluetooth: Ralink corp. RT3290 Bluetooth
	Subsystem: Hewlett-Packard Company Ralink RT3290LE 802.11bgn 1x1 Wi-Fi and Bluetooth 4.0 Combo Adapter
	Flags: bus master, fast devsel, latency 0
	Memory at 61500000 (32-bit, non-prefetchable) [size=64K]
	Capabilities: <access denied>
Almanet doLys, Linux, open source et fintechs : mon tuto pour optimiser / finaliser une install
Xubuntu devel - Manjaro unstable - OpenSUSE tumbleweed Et vous ?
54 convertis GNU/Linux IRL (leur ai pas donné le choix, aussi...).
Un jeune site que j'aime bien, le top du T-shirt homme ...bio en plus : https://goudronblanc.com

Répondre

Revenir vers « Configuration du matériel sous GNU/Linux »

Qui est en ligne ?

Utilisateurs parcourant ce forum : Aucun utilisateur inscrit et 2 invités